Err

PEDALE BASSE EBS DRIVE BILLY SHEEHAN
  • PEDALE BASSE EBS DRIVE BILLY SHEEHAN
  • PEDALE BASSE EBS DRIVE BILLY SHEEHAN

PEDALE BASSE EBS DRIVE BILLY SHEEHAN

EBS
(Code: EBS-BILSHEE)

194,00 €
150,00 €
-23%
1000g
Jusqu'à 10X
sans frais
Frais de port
4.90€* en France
métropolitaine
Livraison rapide
en France

et à l'international
Description
PÉDALE DE MARQUE EBS, MODÈLE BILLY SHEEHAN SIGNATURE


Pédale 2 canaux mixables à souhait avec un canal overdrive et un canal clair. Le compresseur intégré a 3 modes : High, Mid et Off. En mode Mid, un réglage interne permet de régler le ratio et un autre le seuil (Threshold). Cette pédale a 2 boucles d'effet, une claire et une avec overdrive pour y brancher d'autres effets externes. Par exemple, branchez une égalisation sur le canal overdrive pour en sculpter le son. Ou si vous préférez une autre compression, coupez celle de la Billy Sheehan Drive et branchez la sur le canal clair. Pour pouvoir utiliser les boucles d'effet, il vous faut un jack avec 1 embout stéréo d'un côté et 2 embouts mono de l'autre, pour pouvoir séparer le signal. Le réglage Drive contrôle le gain de l'overdrive tandis que Tone règle le creux de fréquence. Level règle le niveau de l'overdrive avant la boucle d'effet Drive et après la compression. Clean règle le niveau du canal clair, avant la boucle Clean et après la compression.

Réglages : Drive, tone, level, clean, sélecteur comp (off/mid/high).

---------------

THE BILLY SHEEHAN SIGNATURE DRIVE PEDAL IS DEVELOPED BY EBS IN CLOSE CO-OPERATION WITH BILLY HIMSELF. IT IS BASED ON THE CONCEPT OF MIXING TOGETHER A CLEAN SIGNAL WITH A DISTORTED TO BE ABLE TO PRESERVE LOW FREQUENCIES AND FIND BALANCE BETWEEN DISTORTION AND DEFINITION.


Built-in Compressor. The option to add compression make possible to keep the note differentiation clearly audible even at heavily distorted sounds. There are three modes for the built-in compressor, High, Mid and Off. For the Mid setting, there's an additional trim pot inside to set the ratio. There's also a trim pot to set the Threshold for the compressor (affect both settings).

Clean Loop, Drive Loop - Endless possibilities! The Billy Sheehan Signature Drive offers unlimited pre-post mix tone shaping, made possible by including a clean loop and a drive loop. It lets the user insert any other effect they wish within each loop to 'pimp' the effect into your own signature effect! For example, connect an external EQ to the Drive Loop and shape the character of the distortion any way you want. Or, turn off the built-in compressor if you prefer to use a different type of compressor and put in the Clean Loop. To use the loop function, you need an additional insert cable (a stereo 1/4" plug that split in a tip and ring female or male 1/4" mono plug).

Controls. With the new extended size box from EBS, there are controls for Drive (gain for the overdrive engine), Tone (sets the frequency scoop for the drive), Level (sets level for drive channel post Drive Loop and pre final compressor) and Clean (sets level for the clean channel, post Clean Loop and pre final compressor). The concept works similar to when you blend the two channels on the preamp of a Fafner II amp.



TECHNICAL SPECIFICATIONS EBS BILLY SHEEHAN SIGNATURE DRIVE

 

Nominal Input Level - 8 dBv
Input Impedance 700 kohms
Gain Range Drive 20 - 40 dB
Tone Filter Range 175 - 4500 Hz
  Q 0.6
Nominal Loop Level   -8 dB
Output Impedance Loops 2 kohms
Input Impedance Loops

47 kohms

Mix Level Drive Channel +3 dB max
  Clean Channel +6 dB max
Compressor Ratio 5:1 (max)
  Threshold -25 +6 dB
  Attack Time (80%) < 10 ms
  Release Time (80%) 100 ms typ
  Makeup gain 0, +3, +6 dB
Output Impedance   < 100 ohms
Dimensions W x H x D 3.5" x 4.5" x 1.4" (90 x 115 x 35 mm)
Weight 480g (1.07 lb.)
Type Analog Effect, Mechanical Switching
Power Requirements 9 - 12 V DC Regulated, 15 mA max*